When it comes to good flooring, vinyl is considered by many to be one of the best options. Because these places receive a lot of moisture circulation, vinyl flooring is ideal for areas like the kitchens and restrooms. It is also durable and inexpensive.
Pine-sol is popular in household cleaning products. It outperforms other cleaners and that is because it cleans away dirt, bacteria, and other pathogens. It can also be used on tough and water-resistant floors.
But, can it be used on vinyl plank flooring?
Although Pine-sol is normally safe to use, it is not an approved solution for use on vinyl floors. If it is used, it should be utilized with caution. It can even be diluted with water before use to prevent it from circulating into the flooring.
Reasons Not to Use Pine-Sol on Vinyl Floors
Despite its water resistance, and longevity. This type of floor is rather fragile when it comes to its maintenance. Pine-sol is a harsh abrasive that when it is applied, lowers the floor’s long-lasting strength and durability.
A few other reasons include:
- A color change. The ground changes color and becomes slightly sticky, greasy, and yellowish.
- Overuse weakens the floor’s adhesive, possibly causing it to even break.
- The components used in the production of Pine-sol are not designed for vinyl flooring. Therefore, it cannot be considered a decent cleaner to use.
- Its fragrance goes hand in hand with its abrasiveness. Pine-sol may cause allergic reactions in people with a sensitive sense of smell.
- It degrades the appearance of the floor over time, causing it to become dull or even worn out.
To use pine-sol, make sure to wash it off instantly after cleaning.
Steps on How to Use Pine-Sol on Vinyl Floors
Despite the effect it has on Vinyl planking flooring, pine-sol is still one of the best cleaning products out there. And if you would still want to make use of it without scarring your floor, there are modest actions to take and follow when cleaning with pine-sol.
Measure out the amount you need.
Pour about one-quarter of the pine-sol cleanser into a bucket full of water. The amount of cups you measure depends on the liters of water. You can add the mixture into a spray bottle to curtail the amount you use.
Dry up with a damp rag or mop.
Spray the combination of water and pine-sol cleanser onto the ground and wipe with a rag. If using a mop, squeeze out the water thoroughly before wiping.
Clean through the coverings thoroughly. Avoid using too much pressure when cleaning.
Wash off completely and dry clean.
Ensure the floor is entirely dry before you walk around on it. Make use of a soft broom or vacuum to remove any leftover dirt.
Cleaning Tips for Vinyl Floors
Not only are Vinyl plank floorings inexpensive, but they also add a distinctive style to your household. They are durable and dependable. However, conventional maintenance is needed to keep it in good condition.
Below are some cleaning suggestions that you can adopt.
Sweeping and Mopping Daily
Vinyl flooring is prone to scratches, which can make it look unappealing. Sweeping or vacuuming every day is advised to remove dirt and other debris that could bring scratches to the floor.
Dust and other filthy particles can be brushed away using a soft broom. Once you’ve confirmed that it is dust-free, wipe the floor with a damp mop, avoiding excessive water. If it is extremely dirty, make use of a washing detergent and a damp rag.
Make Use of a Doormat if Needed
This is an excellent way of preventing dirt from entering your home. Once a doormat or rug is in use, clean or air it regularly.
Restrict the Amount of Water Use
Although water-resistant, Vinyl floors are not entirely invincible. Moist can still leak into the joints of the floor and cause potential damage. When this happens, you might have no choice but be forced to renovate the whole floor if it is completely affected.
Make Use of Other Alternatives
Apple vinegar is an alternative to use if you don’t want to make use of pine-sol. It is a strong and delicate cleaning agent. Because of its acidic ingredients, it helps wipe off grease and other grimy stains. It doesn’t leave behind streaks as most cleaning detergents do. To use, add a little quantity to the bucket of water. Apply little pressure when cleaning the dirtied spot, all the while cleaning the mop or rag with clean water.
If the surface is extremely dirty, consider putting in a few drops of liquid dishwashing detergents to the cleaning mixture.
Avoid Spills as best as You can
There is no wrong or decent way to clean off stains completely. However, there is a way to prevent having to clean your floor all the time and that is by avoiding spills. If there is a spill or stain on the floor, rather than leaving it to dry, clean it off instantly with a damp mop or rag.
Open up the windows after tidying up to let air in. The air dries the floor quickly and more efficiently. During this period, avoid moving around too much to prevent making a mess, and further cleaning.
Don’t Just Make Use of Any Cleaning Products
If you chose to use any floor cleaner, make sure it is appropriate enough for the type of flooring you have. Some cleaning products may be too brutal, and that could cause breakage and removal of the floor’s adhesive glue. Avoid using harsh cleaning materials if possible. Using water and light detergent is still a safe and good option.
Vinyl flooring is attractive and requires little maintenance to keep it good looking conditions. It is a durable flooring option that can last at least fifteen years and even longer! It is a great choice for those looking for something new, stylish, and stable. Properly maintained vinyl plank floors will last longer and provide more enjoyable times. Ensure to always wash out your vinyl flooring after making use of pine-sol or any soapy solution. Or else, it could leave behind defects on your floors.